Wood Finishes - Wesson Hardware

Minwax Semi-Gloss Clear Oil-Based Lacquer 12 oz (Case of 6)

Tim Sutton — Wed, 03 Dec 2025 17:23:20 +0000

Minwax Clear Lacquer Aerosol is a beautiful, clear, durable protective wood finish. It is ideal for interior wood surfaces, and can be used over bare or stained wood. It dries to the touch in 30 minutes, ensuring a smooth, dust-free finish. Recoat in only two hours, with no sanding needed between coats. The finish flows evenly across the wood to provide a smooth surface. Once Minwax Clear Lacquer Aerosol has been applied, another coat can be applied at any time without having to remove the old lacquer finish.

Dries to the touch in 30 minutes, ensuring a smooth, dust-free finish
Requires no sanding between coats
Great for woodwork, cabinets, furniture, doors and accessories
Protect adjacent areas from overspray
Apply thin coats to avoid runs and sags
Let dry at least two hours, then apply a second coat
Apply a third coat, repeating the steps above for each coat, apply a fourth coat, if desired

FEATURES

Brand Name: Minwax
Sheen: Semi-Gloss
Color: Clear
Base Type: Oil-Based
Product Type: Lacquer
Container Size: 12 oz
VOC Level: 569 g/L
Paintable: No
Transparency: Transparent
Time Before Recoating: 30 min
Coverage Area: 125 sq ft
Indoor or Outdoor: Indoor
Full Cure Time: 24 hr
Color Family: Clear
Case of 6

The post Minwax Semi-Gloss Clear Oil-Based Lacquer 12 oz (Case of 6) first appeared on Wesson Hardware.

Minwax Semi-Gloss Clear Oil-Based Lacquer 12 oz

Tim Sutton — Wed, 03 Dec 2025 17:22:03 +0000

Dries to the touch in 30 minutes, ensuring a smooth, dust-free finish
Requires no sanding between coats
Great for woodwork, cabinets, furniture, doors and accessories
Protect adjacent areas from overspray
Apply thin coats to avoid runs and sags
Let dry at least two hours, then apply a second coat
Apply a third coat, repeating the steps above for each coat, apply a fourth coat, if desired

FEATURES

Brand Name: Minwax
Sheen: Semi-Gloss
Color: Clear
Base Type: Oil-Based
Product Type: Lacquer
Container Size: 12 oz
VOC Level: 569 g/L
Paintable: No
Transparency: Transparent
Time Before Recoating: 30 min
Coverage Area: 125 sq ft
Indoor or Outdoor: Indoor
Full Cure Time: 24 hr
Color Family: Clear

The post Minwax Semi-Gloss Clear Oil-Based Lacquer 12 oz first appeared on Wesson Hardware.

Minwax Polycrylic Max Ultra Flat Clear Water-Based Polycrylic 1 qt

Tim Sutton — Mon, 27 Oct 2025 00:06:14 +0000

One-coat protection, perfected. Finish projects faster with this premium, crystal-clear topcoat. Easy to apply, with better control, Polycrylic Max dries in just 1 hour to an incredibly smooth, durable finish.

Minwax Polycrylic Max protective finish protects and adds beauty to interior wood projects, including woodwork, furniture, doors and cabinets
Complete projects up to 2x faster compared to Minwax Polycrylic protective finish
Maximum durability in one coat with no intercoat sanding needed
1 hour dry time (see instructions for details)
Crystal clear, non-yellowing, non-ambering, and low odor top coat protects against scratches, spills, dirt and more
For use on all wood species including light woods like maple, ash and birch
Water-based wood finish allows for easy soap and water clean-up
Ideal for use over all Minwax oil-based and water-based stains and colors
Up to 100 sq. ft. coverage per quart

FEATURES

Brand Name: Minwax
Sub Brand: Polycrylic Max
Sheen: Ultra Flat
Color: Clear
Base Type: Water-Based
Product Type: Polycrylic
Container Size: 1 qt
Time Before Recoating: 2 hr
UV Resistant: No
VOC Level: 207.78 g/L
Coverage Area: 100 sq ft
Full Cure Time: 24 hr
Indoor or Outdoor: Indoor
Color Family: Clear
Application Method: Brush

The post Minwax Polycrylic Max Ultra Flat Clear Water-Based Polycrylic 1 qt first appeared on Wesson Hardware.

Minwax Polycrylic Max Gloss Clear Water-Based Polycrylic 1 qt 633335555

Tim Sutton — Sun, 14 Sep 2025 22:19:24 +0000

Minwax Polycrylic Max protective finish protects and adds beauty to interior wood projects, including woodwork, furniture, doors and cabinets
Complete projects up to 2X faster compared to Minwax Polycrylic protective finish
Maximum durability in one coat with no intercoat sanding needed
1 hour dry time (see instructions for details)
Crystal clear, non-yellowing, non-ambering, and low odor top coat protects against scratches, spills, dirt and more
For use on all wood species including light woods like maple, ash and birch
Water-based wood finish allows for easy soap and water clean-up
Ideal for use over all Minwax oil-based and water-based stains and colors
Up to 100 sq. ft. coverage per quart

FEATURES

Brand Name: Minwax
Sub Brand: Polycrylic Max
Sheen: Gloss
Color: Clear
Base Type: Water-Based
Product Type: Polycrylic
Container Size: 1 qt
Time Before Recoating: 2 hr
UV Resistant: No
VOC Level: 219.85 g/L
Coverage Area: 100 sq ft
Full Cure Time: 24 hr
Indoor or Outdoor: Indoor
Color Family: Clear
Application Method: Brush

The post Minwax Polycrylic Max Gloss Clear Water-Based Polycrylic 1 qt 633335555 first appeared on Wesson Hardware.

Minwax PolyShades Semi-Transparent Gloss Honey Oil-Based Stain/Polyurethane Finish

Tim Sutton — Wed, 09 Jul 2025 19:50:56 +0000

Minwax PolyShades combines stain and polyurethane in one simple step. Each coat provides rich color and lasting protection while enhancing the wood grain. This product will reduce finishing time compared with staining with one product and protecting with another. PolyShades stain and polyurethane also allows you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish you can change the color without removing the old finish or hiding the grain. For additional protection, without adding color, add a coat of Minwax fast-drying polyurethane or Minwax wipe-on poly. Using a natural bristle brush, dip approximately an inch into the can, gently tapping it against the inside to remove any excess. Apply a very thin, even coat following the direction of the grain. Make sure to maintain a “Wet” edge. To minimize the brush marks and bubbles after staining, tip off the surface by holding the brush at a 45 degree angle and lightly run the bristles over the entire length of the wood. Let the first coat dry for 6 hours or more. Dry time may be extended due to high humidity, low temperature and inadequate ventilation or if the coat is applied too thick. Rub the surface lightly with fine steel wool. Remove all dust. Brush on a second thin coat following directions above. To deepen the color, apply a third coat. To help ensure uniform acceptance of stain color and beautiful results, pretreat new or raw wood with oil-based Minwax pre-stain wood conditioner, following label directions.

Enhances wood grain by combining beautiful rich stain color and long-lasting polyurethane protection in one easy step
Can be used over polyurethane finishes, so you can change the color of your finished wood, without removing the existing finish
Reduces finishing time
For stripped, unstained or raw wood, before starting, surface must be dry, clean and free of dirt, grease and glue
Sand the wood in the direction of the grain using fine-grade sandpaper until smooth
Remove all sanding dust

FEATURES

Brand Name: Minwax
Sub Brand: PolyShades
Transparency: Semi-Transparent
Sheen: Gloss
Color: Honey
Base Type: Oil-Based
Product Type: Stain/Polyurethane Finish
Container Size: 1 qt
Tintable: No
Application Method: High-Quality Natural Bristle Brush
Time Before Recoating: 6 hr
VOC Level: 431.14 g/L
Coverage Area: 150 sq ft
UV Resistant: No
Sealer: Yes
Indoor or Outdoor: Indoor
Color Family: Brown

The post Minwax PolyShades Semi-Transparent Gloss Honey Oil-Based Stain/Polyurethane Finish first appeared on Wesson Hardware.

Minwax PolyShades Semi-Transparent Gloss Honey Oil-Based Stain/Polyurethane Finish

Tim Sutton — Wed, 09 Jul 2025 19:50:38 +0000

Enhances wood grain by combining beautiful rich stain color and long-lasting polyurethane protection in one easy step
Can be used over polyurethane finishes, so you can change the color of your finished wood, without removing the existing finish
Reduces finishing time
For stripped, unstained or raw wood, before starting, surface must be dry, clean and free of dirt, grease and glue
Sand the wood in the direction of the grain using fine-grade sandpaper until smooth
Remove all sanding dust

FEATURES

Brand Name: Minwax
Sub Brand: PolyShades
Transparency: Semi-Transparent
Sheen: Gloss
Color: Honey
Base Type: Oil-Based
Product Type: Stain/Polyurethane Finish
Container Size: 1/2 pt
Tintable: No
Application Method: Brush
Time Before Recoating: 6 hr
VOC Level: 431.14 g/L
Coverage Area: 120-150 sq ft
UV Resistant: No
Sealer: Yes
Indoor or Outdoor: Indoor
Color Family: Brown

The post Minwax PolyShades Semi-Transparent Gloss Honey Oil-Based Stain/Polyurethane Finish first appeared on Wesson Hardware.

ProLuxe Gloss Clear Oil-Based Brushing Lacquer

Tim Sutton — Wed, 09 Jul 2025 19:50:03 +0000

Proluxe Interior Clear Brushing Lacquer is the trusted brand for an outstanding, fast drying, and easy to use finish for any interior wood project. Todays professionals and enthusiasts alike continue to appreciate its forgiving nature and resistance to brush marks, as well as its crystal clear finish and fast drying time.

Self-leveling formula
Resists abrasion and marring
Easy application
Long term durability

FEATURES

Brand Name: ProLuxe
Sheen: Gloss
Color: Clear
Base Type: Oil-Based
Product Type: Brushing Lacquer
Container Size: 1 qt
VOC Level: 680 g/L
Paintable: No
Transparency: Transparent
Time Before Recoating: 2 hr
Coverage Area: 125 sq ft
Indoor or Outdoor: Indoor
Color Family: Clear

The post ProLuxe Gloss Clear Oil-Based Brushing Lacquer first appeared on Wesson Hardware.

Minwax Polycrylic Max Semi-Gloss Clear Water-Based Polycrylic

Tim Sutton — Mon, 23 Jun 2025 21:41:25 +0000

Minwax Polycrylic Max protective finish protects and adds beauty to interior wood projects, including woodwork, furniture, doors and cabinets
Complete projects up to 2X faster compared to Minwax Polycrylic protective finish
Maximum durability in one coat with no intercoat sanding needed
1 hour dry time (see instructions for details)
Crystal clear, non-yellowing, non-ambering, and low odor top coat protects against scratches, spills, dirt and more
For use on all wood species including light woods like maple, ash and birch
Water-based wood finish allows for easy soap and water clean-up
Ideal for use over all Minwax oil-based and water-based stains and colors
Up to 100 sq. ft. coverage per quart

Specifications:

Brand Name: Minwax
Sub Brand: Polycrylic Max
Sheen: Semi-Gloss
Color: Clear
Base Type: Water-Based
Product Type: Polycrylic
Container Size: 1 qt
Time Before Recoating: 2 hr
UV Resistant: No
VOC Level: 212.91 g/L
Coverage Area: 100 sq ft
Full Cure Time: 24 hr
Indoor or Outdoor: Indoor
Color Family: Clear
Application Method: Brush

The post Minwax Polycrylic Max Semi-Gloss Clear Water-Based Polycrylic first appeared on Wesson Hardware.

WATCO Transparent Natural Oil-Based Danish Oil (Case of 4)

Tim Sutton — Mon, 23 Jun 2025 21:34:13 +0000

Rust-Oleum Watco Danish Oil is a unique blend of penetrating oil and varnish that hardens in the wood, not on the wood. This oil penetrates deep into wood pores to protect from within while also enhancing the natural look and feel of the wood. It creates the rich, warm glow of a traditional hand-rubbed finish. Brush or wipe on and wipe off, allowing for quick project completion.

Stain, seal and protect in one simple step
Interior use only on wood surfaces not intended for wood floors
Oil-based formula can be brushed or wiped on to create the rich, warm glow of a traditional hand-rubbed finish
Apply fresh coats as need to repair the surface when any scratches or minor stains appear

Specifications:

Brand Name: WATCO
Transparency: Transparent
Color: Natural
Base Type: Oil-Based
Product Type: Danish Oil
Container Size: 1 qt
Tintable: No
Application Method: Wipe/Brush
Time Before Recoating: 72 hr
VOC Level: 492 g/L
Coverage Area: 689 sq ft
UV Resistant: Yes
Sealer: Yes
Indoor or Outdoor: Indoor
Color Family: Brown
Case of 4

The post WATCO Transparent Natural Oil-Based Danish Oil (Case of 4) first appeared on Wesson Hardware.

Old Masters Semi-Transparent Special Walnut Oil-Based Alkyd Gel Stain

Tim Sutton — Fri, 13 Jun 2025 16:18:50 +0000

Old Masters Gel Stain is a highly pigmented, oil-based stain designed to achieve intense colors on interior surfaces. Gel Stain is designed for application on wood, plastic, fiberglass and other composition surfaces. Its thick formula allows for easy application and superior color control, necessary to achieve a rich and uniform color on most surfaces in a single application. Ideal for difficult to stain woods such as pine, poplar, maple, plywood and veneers, as well as non-porous surfaces including primed metal, composition, interior and exterior fiberglass doors and plastic moldings. Gel Stain comes in 23 factory mixed colors and can also be intermixed to achieve custom colors. For the exterior side of front entry doors (wood or fiberglass) please use an exterior clear finish to topcoat.

Tintable with universal colorants
Clean up with mineral spirits or paint thinner
Great for hard to stain wood
Stain application varies based on surface material

Specifications:

Brand Name: Old Masters
Transparency: Semi-Transparent
Color: Special Walnut
Base Type: Oil-Based
Coating Material: Alkyd
Product Type: Gel Stain
Container Size: 1 qt
Contents Before Colorant: 2.25 oz
Tintable: Yes
Application Method: Brush, Cloth and Rag
Time Before Recoating: 8 hr
VOC Level: 550 g/L
Coverage Area: 250-300 sq ft
UV Resistant: No
Sealer: No
Indoor or Outdoor: Indoor and Outdoor
Color Family: Brown

The post Old Masters Semi-Transparent Special Walnut Oil-Based Alkyd Gel Stain first appeared on Wesson Hardware.